Universal External Laptop Battery
The Specification of the CM168-L60
1. Product Description:
This is a universal external battery pack, Applicable for 80%
models of laptop, compatible with all digital devices charged by
USB port.
2. Configuration
This product made up of Lithium battery, 1pcs PCB board, and
housing.
Color: argent
Weight: 700g
Material: crust aluminum
Dimension: Lmax220mmxWmax130mm*Hmax15mm
Button: the output voltage and capacity checking indicated through
the same button.
Indicator: 5 green LED to indicate the capacity. The last LED in
green when full charged, its red when charging.
Switch: voltage switch (16V,19V)
Charge Port: DC port
Discharge Port: USB, out DC port
3. Technic Parameter
Capacity: 6000mAh Cell Voltage: 3.7 V
Input Voltage: 16V,19V Output Current: 3.75A (16V)
Output Voltage: 5V,16V,19V Output Power: 60W max
Max Input Voltage: 25V Input Current: 2.5A max
Cycle life: ‰¥300 times Charge Time: 5 hours
Cycle type: Lithium polymer
4. Function & Usage
Charge
Attention: When charging, the model WTEL1556A will output power
directly to LOAD as per charging voltage. (namely charging and
discharging simultaneously). If the charging voltage is higher or
lower than LOAD rating voltage, it may damage LOAD. Therefore, when
LOAD rating voltage is not equal to charging voltage, cannot
connect with LOAD when charging.
When choose the AC adaptor of 15-25W, can charge WTEL1556A
directly. Or use charging tips to charge. Charging indicator.
Status: The indicator in RED when charging, in GREEN when full
charge.
Discharge
Charging and discharging simultaneously. the output of WTEL1556A is
as per charging voltage, not as per fixed voltage. Have to choose
suitable voltage when charging.
Normal discharging.
Output when not charging, have to make sure the optional switch to
the side of VOL Press the button VOL/ CHECK, the indicator will
show output voltage, after choosing, make sure the optional switch
to the side of CHECK. To connect LOAD then natural output.
Attention: When low voltage, the indicator will flash and means low
voltage, will power off soon.
USB
Output automatically: USB output continuously when charging and
discharging.
Output by hand: when not charging and discharging, make sure the
optional switch to the side of check, press the button vol/ check,
USB start to output. If the USB LOAD is little(about 800mA), USB
will power off automatically.
Capacity checking
Make Optional switch to the side of check, press the button VOL/
CHECK. Will show capacity. The capacity chart is as below.
Capacity/output indicator Capacity
1 LED blinks, 0‰¤RP‰¤10%
1 LED lights on 10%‰¤RP‰¤30%
2 LED lights on, 30%‰¤RP‰¤50%
3 LED lights on, 50%‰¤RP‰¤70%
4 LED lights on, 70%‰¤RP‰¤90%
5 LED lights on, 90% ‰¤RP‰¤100%
